Sealers, cleaners
Adhesives & waterproofing
Sure Seal
http://www.suresealsealants.com.au/index.html
Sure Seal – Tile Sealer Aerosol Tile Impregnator
Sure Seal® Grout & Tile Aerosol Sealer – World’s first aerosol grout and tile sealer, specifically formulated to seal grout lines between glazed ceramic tiles. Overspray on surrounding ceramic tiles is not a problem, as Sure Seal® dries invisible. Winner of the “Best New Industry Product” award in Oct. 2003 by the Australian Tile Council. This quick-drying impregnator can be applied to bench tops, bathroom/shower recesses, small floor areas on all types of grout, tile and masonry surfaces. Can be used to seal damp/wet grout within 20 minutes of installation, as well as dry grout. Will not harm aluminium, wood or carpet.
Sure Seal -Tile, Grout & Masonry Sealer Quick Drying Liquid ImpregnatorPenetrating Sealer for Grout, Tile And Masonry- Quick Drying Impregnator in liquid form using same formulation as award-winning aerosol. Suitable for all types of tile and masonry surfaces, including grout (damp/wet or dry), quarry tile, sandstone, terra cotta, limestone, stucco, concrete, porcelain, marble and granite. Helps protect treated surface against oil and water-based stains.
Sure Seal – Porcelain Sealer Slow Drying Impregnator for Porcelain
Slower-drying impregnator, specifically formulated to seal porcelain, granite and marble, but works equally as well in preventing oil and water-based stains on all types of tile and masonry surfaces, including sandstone, limestone, terracotta and concrete.
Sure Seal – Ezy-As 1.2.3 Interior & Exterior Sheen Based Sealer
Ezy-As 1.2.3. a sheen-based impregnator for interior and exterior unpolished surfaces such as slate, pavers, terracotta, limestone, concrete.Ezy-As 1.2.3., an industry first, is actually three products in one! Achieve the level of sheen needed by the application of one, two or three coats. Purchasing more than 3 or 4 products for different levels of sheen, is a thing of the past!Ezy-As 1.2.3. is all in one…. one coat for a low sheen, two coats for a semi-gloss and three for a full gloss. The product is low odour, water-based and non-flammable and will maintain a tough, durable finish that resists abrasion. It won’t peel or flake off the treated surface and repels both oil and water-based stains. Easy to apply; clean rollers and brushes after use with water.
ADHESIVES
RLA / Atlas Adhesives
http://www.rlapolymers.com.au/
Addflextra |
|
Super Tilefix |
|
Ezyfix NS |
|
Just 2 Ezy |
|
Universal Primer |
|
Construction Chemicals
http://www.constructionchemicals.com.au/
Cemflex A polymer modified rubber based, fast setting, cementitious adhesive for bonding ceramic and stone tiles to porous and non-porous surfaces |
|
Drymastic A white polymer modified cement based adhesive with non-shrink and non-slip/slump properties |
|
Elastacrete Replaces water in Kemgrip Floor & Wall to make an adhesive that has flexibility, strength, improved bond strength and is chemical, vibration and shock resistant |
|
Gripflex A white flexible polymer modified, water resistant, fast setting, cement based adhesive for bonding ceramic and stone tiles to porous and non-porous surfaces subject to vibration and thermal movement. |
|
Kemflex 2:1 A two-pack flexible general purpose internal and external floor and wall adhesive, suitable for thin or thick bed application on surfaces subject to vibration and temperature fluctuation movement. Exceeds the performance requirement of AS4992. |
|
Kemgrip Floor & Wall A cement powder based adhesive formulated to be mixed with water. A thick or thin bed adhesive for bedding and fixing ceramic tiles to firm masonry surfaces. |
|
Kemgrip Standard A cement powder based adhesive formulated to be mixed with water. A thick bed adhesive for bedding and fixing ceramic tiles to firm masonry surfaces. |
|
Kemgrip Super A cement powder based adhesive formulated to be mixed with water. A thick or thin bed adhesive for bedding and fixing ceramic tiles to firm masonry surfaces. A waterproof floor and wall adhesive, off-white in colour, for when extra grip or non-slip properties are required. |
|
Monoflex |
|
Mosaicbond A premium grade, internal and external floor and wall adhesive with exceptional performance. Formulated to allow the bonding and grouting (1mm-3mm joints) of mosaics tiles in one application. Can be used on many different surfaces i.e., fibre cement sheet, plasterboard, concrete, ceramic tiles and smooth concrete. |
|
Tilemastic A premium, white premixed, water resistant, flexible wall tile adhesive with excellent non-slip properties and bond strength. |
|
Trademastic A white premixed thin bed acrylic based ceramic tile adhesive with non-slip properties. |
|
Kemcrete |
|
Primax A two pack, water resistant bonding primer with exceptional adhesion to difficult to adhere to surfaces. |
|
Primebond Primer – An acrylic based liquid used to prime dusty and porous surfaces. Use on porous concrete, cement render, fibre cement and gypsum building boards. |
|
Super Prime A water based acrylic primer with solvent like penetration properties for use on smooth/helicoptered/steel trowelled concrete. Improves adhesion and reduces air bubbles from rising through levelling compounds. |
|
Level Floor Standard A resin modified, fast setting cement based compound for use as an underlay and repair screed. Its smooth texture and high fluidity allow ease of placement, trowelling, feather edging and finish. |
|
Level Floor Tuff A resin modified, fast setting cement based compound for use as a levelling compound and repair screed. Its smooth texture and high fluidity allow ease of placement, trowelling, feather edging and finish. |
|
Level Floor V15 A resin modified, fast setting, chemical cure, cement based compound for use as an underlay and repair screed. Its smooth texture and high fluidity allow ease of placement, trowelling, feather edging and finish. |
|
Davco
Gold Label
Powder Mastic |
|
Supamastic |
|
Slate and Quarry Grout |
|
Sanitized® Superfine White |
|
Sanitized® Colorgrout |
|
Waterproofing
ASA / Bostik
Dampfix 2 A specifically formulated water based membrane ideal for commercial and residential internal and external waterproofing applications. |
|
Dampfix 3 A water membrane that is specifically formulated to be low in odour and is suitable for internal and external waterproofing applications. |
|
Dampfix Gold An elastomeric, UV stable, one part, fibre-reinforced water based polyurethane membrane. |
|
Dampfix Gold Grey Dampfix Gold Grey is an elastomeric, UV stable, one part, fibre-reinforced water based polyurethane membrane. |
|
Construction Chemicals
Hydrathane A one-part water based polyurethane waterproofing membrane which is flexible, tough and fast curing. The cured membrane will remain tough, elastic and can bridge and seal hairline cracks. Internal wet areas must be waterproofed in accordance with AS3740 and AS4654.2 and local regulations. |
|
Liquid Flash 1 A premixed one-pack, grey, waterbased, microfibre reinforced acrylic flexible waterproofing membrane that is easily applied with a brush to form a resilient waterproof/flashing membrane between different building surfaces. Will remain pliable and elastic and will bridge cracks and smooth irregular surfaces. The cured membrane is resistant to UV and mild chemical attack. Internal wet areas must be waterproofed in accordance with AS3740 and AS4654.2 and local regulations. |
|
Liquid Flash 2 A two-pack fast drying, microfibre reinforced, cement/acrylic flexible waterproofing membrane that is easily applied to form a resilient waterproof membrane over different building surfaces. Will remain pliable and elastic and will bridge cracks and smooth irregular surfaces. Internal wet areas must be waterproofed in accordance with AS3740 and AS4654.2 and local regulations. |
|
Davco
K10 Plus High performance, easy to use waterproofing membrane. Passes AS4858 requirements and is Certified as a Class III (High Extensibility) membrane. |
|
Dampflex AS 4858 Certified Waterproofing Membrane. |
|
Dampflex Reo AS4858 Certified Waterproofing Membrane. Acrylic Based |
|
Duraflex UV Stable Acrylic Membrane Suitable for prolonged external use. |
|
RLA
http://www.rlapolymers.com.au/
Dryflex Pump Dryflex Pump is suitable for use both internal and external waterproofing applications.Dryflex Pump complies with AS4858:2004 (internal membranes) and AS4654.1:2009 (external membranes) as a class 111 Elastomeric liquid applied membrane. |
PRODUCT RANGE
TRADING HOURS
Monday to Thursday - 7:30am - 5:00pm
Friday - 7:30am - 5:00pm
(Closed between 12:30pm – 2:30pm every Friday)
Saturday - 8:30am – 3:00pm
Sunday - Closed
GET IN TOUCH
(07) 3341 7811
(07) 3341 1671